Things you need for this exercise
- Phillips#2 screwdriver
- Awl
- Replacement laptop inverter board
Now onward to the exercise.
Turn Off The Laptop
First turn off the laptop and remove the power adapter. Remove all external devices and then flip the laptop over.Unlock and remove the battery pack from the bottom of the laptop.
Turn The Laptop Over
Turn the laptop over again and open the monitor screen. Now open up the keyboard edge cover just above the top row of keys using an awl or flathead screwdriver.Then move the keyboard edge from the laptop. Now remove the rubber placer grommets along the front edge of the screen bezel with an awl. And then loosen and remove the screws holding the screen bezel. Use the awl to remove the two pieces of the screen brezel and remove the front one.
Disconnect LCD
Next disconnect the LCD backlight bulb from the motherbulb near the base of the LCD screen. And then remove the screws holding the laptop inverter board. After removing the screws, you then remove the inverter board and set it aside. Next, connect the wire for the new inverterboard to the motherboard connector. After connecting both wires, connect the back side board on the right side of the new inverterNow replace the bezel and secure it with the retaining screws. Insert the grommets and press them into place.
Finally, use the same steps you used to put it back again.
Turn Off The Laptop
First turn off the laptop and remove the power adapter. Remove all external devices and then flip the laptop over.Unlock and remove the battery pack from the bottom of the laptop.
Turn The Laptop Over
Turn the laptop over again and open the monitor screen. Now open up the keyboard edge cover just above the top row of keys using an awl or flathead screwdriver.Then move the keyboard edge from the laptop. Now remove the rubber placer grommets along the front edge of the screen bezel with an awl. And then loosen and remove the screws holding the screen bezel. Use the awl to remove the two pieces of the screen brezel and remove the front one.
Disconnect LCD
Next disconnect the LCD backlight bulb from the motherbulb near the base of the LCD screen. And then remove the screws holding the laptop inverter board. After removing the screws, you then remove the inverter board and set it aside. Next, connect the wire for the new inverterboard to the motherboard connector. After connecting both wires, connect the back side board on the right side of the new inverterNow replace the bezel and secure it with the retaining screws. Insert the grommets and press them into place.
Finally, use the same steps you used to put it back again.
Well That's a wrap for "How To Get Your Laptop Inverter Board To Work ".
Till then take care
If you are here and you want to learn how to fix laptops as a career or past time, Download Laptop Repair Made Easy
No comments:
Post a Comment