Tools needed for this exercise:
- Small flat head screw driver
- Small Phillips head screw driver
Now onward to the exercise:
Turn Off Your Laptop
Turn off your laptop and remove the power chord. Then flip the laptop over and slide the release lever to loosen and remove the battery. Next, pull the battery out of the case. Now remove the keyboard cover with a flat head screw driver to take out the retaining screws, starting with the right hand side,middle, and right hand side.
After taking care of the keyboard cover, you now remove the retaining screws from the back panel of the laptop. And then remove the screws that hold the antennae in place and the antennae to the side of the laptop.
Remove The Laptop Display's Adapter Cable
Remove the laptop display's adapter cable from the motherboard. And then remove the screws holding the laptop's display assemble to the top of the laptop's case. Now carefully lift the display assembly free of the laptop case. Next carefully set the new laptop display in place. Then replace the retaining screws that hold the laptop display in place and then connect the adapter cable to the motherboard. And finally reassemble the case to test the laptop display. Should work like a charm.
If you are here and you want to learn how to fix laptops as a career or past time, Download Laptop Repair Made Easy
No comments:
Post a Comment