Things you'll need for this exercise:
- OHM meter(Buy one at your nearest electronics store)
- A/C Adapter
- Power Supply
Plug A/C adapter into a Wall Socket
Place The Red Wire at OHM Meter
- On the OHM meter, place the red wire at the slot with a + sign(positive). Then plug the black wire in the - slot(negative). Make sure the plastic handles are off when you slot in the the wire ends.
- Set the Ohm meter to DCV(Direct Current Voltage) and make sure the voltage on the Ohm is set higher than that of the voltage listed on the power supply.the recommended level for the Ohm is 50.
- Place the tip of the black conductor on the outside of the a/c adapter.
- Place the tip o0f the red conductor inside the a/c adapter.
- Look at the needle reading to check whether power is being supplied. If the voltage needle lands on the marking near the listed voltage, it means there is power in your laptop, if not, then it means the power supply is dead. Meaning it is time to send your laptop to the repair shop.
So this is how to check whether your laptop power supply works or not. If you follow the above suggestions you should be able to tell whether you have power in your laptop or not.
If you want to learn how to fix your laptop, I suggest you download Laptop Repair Videos. And for diagram illustration and explanation, download &
The Laptop Repair Workbook: An Introduction to Troubleshooting and Repairing Laptop Computers. . It should be a perfect accompaniment to watching the videos.
No comments:
Post a Comment